Rick Green Rick Green's Profile Page

Rick Green Rick Green

0 Course Enrolled • 0 Course Completed

Biography

300-410시험대비최신덤프자료, 300-410시험패스인증덤프공부

ExamPassdump의 Cisco인증300-410시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Cisco인증300-410시험덤프자료를 제공받을수 있습니다.

Cisco 300-410 인증 시험은 엔터프라이즈 수준의 라우팅 기술 및 서비스 구현 및 관리에 대한 후보자의 지식과 기술을 평가하는 90 분 테스트입니다. 이 시험에는 60-70 개의 객관식 질문이 포함되어 있으며 계층 3 기술, VPN 기술, 인프라 보안, 인프라 서비스 및 자동화를 포함한 다양한 주제를 다룹니다. 응시자는 시험을 통과하고 인증을 받기 위해 이러한 개념을 확실하게 이해해야합니다. Cisco 300-410 인증은 3 년 동안 유효하며, 후보자는 엔터프라이즈 라우팅 및 서비스에서 CCNP (Cisco Certified Network Professional)로서의 지위를 유지하기 위해 인증을 갱신해야합니다.

Cisco 300-410 (Implementing Cisco Enterprise Advanced Routing and Services) 자격증 시험은 기업 네트워크에서 고급 라우팅과 서비스를 구현하는 네트워크 엔지니어와 관리자의 기술과 지식을 검증하는 전문가 수준의 자격증 시험입니다. 이 시험은 OSPFv2, OSPFv3, EIGRP, BGP 및 PBR과 같은 라우팅 프로토콜과 VPN, QoS, 보안 및 자동화와 관련된 다양한 주제를 다룹니다. Cisco 300-410 시험은 CCNP Enterprise 자격증을 취득하기 위해 취할 수 있는 6개의 집중 시험 중 하나입니다.

Cisco 300-410 인증 시험은 엔터프라이즈 네트워크에서 고급 라우팅 기술 및 서비스를 구현하는 기술을 검증하려는 네트워크 전문가에게 중요한 인증입니다. 이 시험을 통과함으로써 후보자들은 Cisco Enterprise Network 솔루션에 대한 숙련도를 보여주고 네트워킹 업계에서 경력을 발전시킬 수 있습니다.

>> 300-410시험대비 최신 덤프자료 <<

300-410시험대비 최신 덤프자료 완벽한 시험덤프 샘플문제 다운

우선 우리ExamPassdump 사이트에서Cisco 300-410관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ExamPassdump에 신뢰감을 느끼게 됩니다. ExamPassdump에서 제공하는Cisco 300-410덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.

최신 CCNP Enterprise 300-410 무료샘플문제 (Q564-Q569):

질문 # 564
Refer to the exhibit.

An engineer configures DMVPN and receives the hub location prefix of 10.1.1.0724 on R2 and R3 The R3 prefix of 10 1.3.0/24 is not received on R2. and the R2 prefix 10.1,2.0/24 is not received on R3. Which action reserves the issue?

A. Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the command no ip split-horizon eigrp 10 on the tunnel interface of R1
B. There is no spoke-to-spoke connection DMVPN configuration should be modified with a manual neighbor relationship configured between R2 and R3 and confirmed bb use of the show ip eigrp neighbor command.
C. There is no spoke-to-spoke connection DMVPN configuration should be modified to enable a tunnel connection between R2 and R3 and neighbor relationship confirmed by use of the show ip eigrp neighbor command
D. Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the no ip split-horizon eigrp 10 command on the Gi0/0 interface of R1.

정답：A

설명：
Explanation
In this topology, the Hub router will receive advertisements from R2 Spoke router on its tunnel interface. The problem here is that it also has a connection with R3 Spoke on that same tunnel interface. If we don't disable split-horizon, then the Hub will not relay routes from R2 to R3 and the other way around. That is because it received those routes on the same interface tunnel and therefore it cannot advertise back out that same interface (split-horizon rule). Therefore we must disable splithorizon on the Hub router to make sure the Spokes know about each other.

질문 # 565
An engineer is troubleshooting on the console session of a router and turns on multiple debug commands. The console screen is filled with scrolling debug messages that none of the commands can be verified if entered correctly or display any output. Which action allows the engineer to see entered console commands while still continuing the analysis of the debug messages?

A. Configure the no logging console debugging command globally
B. Configure the term no mon command globally
C. Configure the logging synchronous command
D. Configure the logging synchronous level all command

정답：C

설명：
Let's see how the "logging synchronous" command affect the typing command:
Without this command, a message may pop up and you may not know what you typed if that message is too long. When trying to erase (backspace) your command, you realize you are erasing the message instead.

With this command enabled, when a message pops up you will be put to a new line with your typing command which is very

질문 # 566
An engineer configured VRF-Lite on a router for VRF blue and VRF red. OSPF must be enabled on each VRF to peer to a directly connected router in each VRF. Which configuration forms OSPF neighbors over the network 10.10.10.0/28 for VRF blue and 192.168.0.0/30 for VRF red?

A. router ospf 1 vrf blue
network 10.10.10.0 0.0.0.240 area 0
router ospf 2 vrf red
network 192.168.0.0 0.0.0.252 area 0
B. router ospf 1 vrf blue
network 10.10.10.0 0.0.0.15 area 0
router ospf 2 vrf red
network 192.168.0.0 0.0.0.3 area 0
C. router ospf 1 vrf blue
network 10.10.10.0 0.0.0.252 area 0
router ospf 2 vrf red
network 192.168.0.0 0.0.0.240 area 0
D. router ospf 1 vrf blue
network 10.10.10.0 0.0.0.3 area 0
router ospf 2 vrf red
network 192 168.0.0 0.0.0.15 are 0

정답：B

질문 # 567
Refer to the exhibit.

An engineer noticed that the router log messages do not have any information about when the event occurred. Which action should the engineer take when enabling service time stamps to improve the logging functionality at a granular level?

A. Replace OSPF process 10 on the interfaces with OSPF process 1 for the IPv6 address and remove process 10 from the global configuration
B. Replace OSPF process 10 on the interfaces with OSPF process 1. and remove process 10 from the global configuration
C. Replace OSPF process 10 on the interfaces with OSPF process 1 and configure an additional router IO with IPv6 address
D. Replace OSPF process 10 on the interfaces with OSPF process 1 for the IPv4 address and remove process 10 from the global configuration

정답：D

질문 # 568
What is a function of IPv6 Source Guard?

A. It notifies the ND protocol to inform hosts if the traffic is denied by it.
B. It denies traffic from known sources and allocated addresses.
C. It inspects ND and DHCP packets to build an address binding table.
D. It works with address glean or ND to find existing addresses.

정답：D

설명：
IPv6 source guard is an interface feature between the populated binding table and data traffic filtering. This feature enables the device to deny traffic when it is originated from an address that is not stored in the binding table. IPv6 source guard does not inspect ND or DHCP packets;rather, it works in conjunction with IPv6 neighbor discovery (ND) inspection or IPv6 address glean, both of which detect existing addresses on the link and store them into the binding table.

질문 # 569
......

ExamPassdump를 검색을 통해 클릭하게된 지금 이 순간 IT인증자격증취득Cisco 300-410시험은 더는 힘든 일이 아닙니다. 다른 분들이Cisco 300-410시험준비로 수없는 고민을 할때 고객님은 저희 Cisco 300-410덤프로 제일 빠른 시일내에 시험을 패스하여 자격증을 손에 넣을수 있습니다.

300-410시험패스 인증덤프공부: https://www.exampassdump.com/300-410_valid-braindumps.html

Rick Green Rick Green

Biography

ABOUT

Pages

Contact