Sid West Sid West's Profile Page

Sid West Sid West

0 Course Enrolled • 0 Course Completed

Biography

Pass Guaranteed Quiz NSE7_EFW-7.2 - Fortinet NSE 7 - Enterprise Firewall 7.2 Fantastic Valid Exam Materials

BTW, DOWNLOAD part of DumpsActual NSE7_EFW-7.2 dumps from Cloud Storage: https://drive.google.com/open?id=1ShZqZOYDHUdUKQUamNZMu6-xaMHyI0oF

There are a lot of leading experts and professors in different field in our company. The first duty of these leading experts and professors is to compile the NSE7_EFW-7.2 exam questions. In order to meet the needs of all customers, the team of the experts in our company has done the research of the NSE7_EFW-7.2 Study Materials in the past years. And they have considered every detail of the NSE7_EFW-7.2 practice braindumps to be perfect. That is why our NSE7_EFW-7.2 learning guide enjoys the best quality in the market!

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

Topic
Details

Topic 1

VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.

Topic 2

Central management: The topic of Central management covers implementing central management.

Topic 3

Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.

Topic 4

System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.

Topic 5

Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.

>> NSE7_EFW-7.2 Valid Exam Materials <<

100% Pass 2025 Fortinet NSE7_EFW-7.2: The Best Fortinet NSE 7 - Enterprise Firewall 7.2 Valid Exam Materials

The Fortinet NSE7_EFW-7.2 PDF questions file of DumpsActual has real Fortinet NSE7_EFW-7.2 exam questions with accurate answers. You can download Fortinet PDF Questions file and revise Fortinet NSE 7 - Enterprise Firewall 7.2 NSE7_EFW-7.2 exam questions from any place at any time. We also offer desktop NSE7_EFW-7.2 practice exam software which works after installation on Windows computers. The NSE7_EFW-7.2 web-based practice test on the other hand needs no software installation or additional plugins. Chrome, Opera, Microsoft Edge, Internet Explorer, Firefox, and Safari support the web-based NSE7_EFW-7.2 Practice Exam. You can access the Fortinet NSE7_EFW-7.2 web-based practice test via Mac, Linux, iOS, Android, and Windows. DumpsActual Fortinet NSE 7 - Enterprise Firewall 7.2 NSE7_EFW-7.2 practice test (desktop & web-based) allows you to design your mock test sessions. These Fortinet NSE7_EFW-7.2 exam practice tests identify your mistakes and generate your result report on the spot.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q24-Q29):

NEW QUESTION # 24
Refer to the exhibit, which shows a custom signature.

Which two modifications must you apply to the configuration of this custom signature so that you can save it on FortiGate? (Choose two.)

A. Start options with --.
B. Ensure that the header syntax is F-SBID.
C. Add attack_id.
D. Add severity.

Answer: A,B

NEW QUESTION # 25
An administrator configured the following command on FortiGate.
config router ospf
set restart-mode graceful-restart
Which two statements correctly describe the result of the above command? (Choose two.)

A. In an HA cluster, FortiGate devices will keep the OSPF routes in their routing table to avoid traffic interruption during an HA failover.
B. After the default 40 seconds wait time, the OSPF neighbors will resume communication with the restarting router.
C. The OSPF neighbor that receives the grace link-state advertisement (LSA) will enter into helper mode.
D. FortiGate is configured with graceful restart, and will exit graceful mode, if the network topology changes.

Answer: A,C

NEW QUESTION # 26
Refer to the exhibit, which contains a partial BGP combination.

You want to configure a loopback as the OGP source.
Which two parameters must you set in the BGP configuration? (Choose two)

A. ibgp-enfoce-multihop
B. update-source
C. recursive-next-hop
D. ebgp-enforce-multihop

Answer: B,D

Explanation:
To configure a loopback as the BGP source, you need to set the "ebgp-enforce-multihop" and "update-source" parameters in the BGP configuration. The "ebgp-enforce-multihop" allows EBGP connections to neighbor routers that are not directly connected, while "update-source" specifies the IP address that should be used for the BGP session1. References := BGP on loopback, Loopback interface, Technical Tip: Configuring EBGP Multihop Load-Balancing, Technical Tip: BGP routes are not installed in routing table with loopback as update source

NEW QUESTION # 27
Exhibit.

Refer to the exhibit, which contains an active-active toad balancing scenario.
During the traffic flow the primary FortiGate forwards the SYN packet to the secondary FortiGate.
What is the destination MAC address or addresses when packets are forwarded from the primary FortiGate to the secondary FortiGate?

A. Secondary virtual MAC port1 then physical MAC port1
B. Secondary physical MAC port2 then virtual MAC port2
C. Secondary physical MAC port1
D. Secondary virtual MAC port1

Answer: D

Explanation:
The destination MAC address when packets are forwarded from the primary FortiGate to the secondary FortiGate is the secondary virtual MAC port1. This is because the primary FortiGate uses the virtual MAC address of the secondary FortiGate as the destination MAC address for the SYN packet. The virtual MAC address is derived from the HA group ID and the interface ID, and it is unique for each HA cluster member and interface. The virtual MAC address enables the secondary FortiGate to receive the SYN packet without ARP resolution. Reference: You can find more information about active-active load balancing and virtual MAC address in the following Fortinet Enterprise Firewall 7.2 documents:
Virtual server load balance
NP session offloading in HA active-active configuration
Technical Tip: How to enable TCP load balance in HA with active-active mode

NEW QUESTION # 28
Refer to the exhibits, which show the configurations of two address objects from the same FortiGate.
Engineering address object

Finance address object

Why can you modify the Engineering address object, but not the Finance address object?

A. FortiGate is registered on FortiManager.
B. You have read-only access.
C. Another user is editing the Finance address object in workspace mode.
D. FortiGate joined the Security Fabric and the Finance address object was configured on the root FortiGate.

Answer: D

Explanation:
In workspace mode the "OK" button is present, you get an error message as soon as you click on it.
When you create a fabric object on a root device, it will synchronize to the downstream devices (if enable) and you will not be able to modify the object on any downstream devices. The "OK" button will NOT be available on downstream devices.

NEW QUESTION # 29
......

The APP online version of the NSE7_EFW-7.2 exam questions can provide you with exam simulation. And the good point is that you don't need to install any software or app. All you need is to click the link of the online NSE7_EFW-7.2 training material for one time, and then you can learn and practice offline. If our NSE7_EFW-7.2 Study Material is updated, you will receive an E-mail with a new link. You can follow the new link to keep up with the new trend of NSE7_EFW-7.2 exam.

Practical NSE7_EFW-7.2 Information: https://www.dumpsactual.com/NSE7_EFW-7.2-actualtests-dumps.html

What's more, part of that DumpsActual NSE7_EFW-7.2 dumps now are free: https://drive.google.com/open?id=1ShZqZOYDHUdUKQUamNZMu6-xaMHyI0oF

Sid West Sid West

Biography

ABOUT

Pages

Contact